Franchise hotline:400-830-9488
Wall finishing and leak repair Dealers wanted nationwide
Wall finishing and leak repair Dealers wanted nationwide
Franchise hotline:400-830-9488
You are here: Home » Wood paint » Ali Master Low-Carbon Odorless Wood Coating Series
The Ali Master varnish series products use low-viscosity, high-solid-content natural plant oil-modified resin, making them a better material for modern home decoration.
Product Introduction|PRODUCT PRESENTATION
| Scope of Application | Bamboo and wood products |
| Gloss | Matte/Semi-matte/Glossy |
| Coating area | 8-10 square meters/KG (based on the main agent) |
| Scope of application | Suitable for the decoration and protection of various indoor wooden floor surfaces |
Product Features|PRODUCT FEATURES
●1. Excellent yellowing resistance
●2. Good color retention
●3. Excellent coverage
●4. Good plasticity and excellent polishability
●5. High hardness
Scene Display|Scene Display
Product Description|PRODUCT DESCRIPTION
Ali Master varnish series products use low-viscosity, high-solid-content natural plant oil-modified resin and are a better material for modern home decoration.
Construction Guide|CONSTRUCTION GUIDE
| Substrate treatment | 320# sandpaper sanding (removing stains, wood fuzz, and burrs from the surface of the board) |
| Sheet sealing | Sealing primer (for sealing boards) water and oil resistant. Apply by brushing. |
| Hole filling treatment | Apply putty (fill wood holes, improve the smoothness of the paint film) |
| Primer Application | Apply primer (to fill wood holes and increase the thickness of the paint film) |
| Matte finish | 320# sandpaper sanding (to increase adhesion, remove residual putty on the wood surface, and enhance interlayer adhesion) |
| Primer Application | Apply primer (further smooth the wood surface, increase the paint film thickness) |
| Matte finish | Sanding with 600# sandpaper (to increase adhesion, smooth the paint film, and enhance interlayer adhesion) |
| Topcoat application | Apply a topcoat (to reduce surface particles on the paint film and achieve a better coating effect on the paint film surface) |
| Matte finish | Sand with 600# sandpaper (to make the entire paint film surface smooth and even, and to increase the adhesion of the paint film) |
| Topcoat application | Apply topcoat paint (to give the paint film a uniform gloss, color, and other decorative and protective functions, ensuring a better coating effect on the surface of the paint film). Note: A. When brushing, coating, or spraying, it should be even without dripping. B. Grind evenly when sanding, avoid grinding through, and remove surface dust after sanding. C. Due to differences in construction methods, the number of coats of primer and topcoat can be adjusted according to actual needs. |
| Drying time | (Based on a dry film of 30 μm and a temperature of 25°C) Surface dry: within 30 minutes; fully dry: ≤24 hours; 7 days/25°C. If the temperature is below 25°C and the paint film is thicker (more than 30 μm), the curing time should be correspondingly extended to achieve the desired coating effect. |
| Repaint time | The previous coat of paint must be dry for at least 4 hours and should be thoroughly sanded and dried before recoating. If the temperature is below 25°C and the paint film is relatively thick (greater than 30μm), the recoating time should be correspondingly extended. |
LinksAuto Spray EquipmentSpray GunPaint FranchiseWood Paint MakerChina Coatings NetGarment TagsArt Paint FranchiseArt PaintCustom office furnitureOffice furniture manufacturerImported Decorative PaintOffice furnitureImported Decorative PaintOffice furniture brandOffice furniture designSearch External Links
© 2017 Master Ali All rights reserved. ICP: Yue ICP Bei No. 11031542
