Product Model|PRODUCT MODEL

Low-Carbon, Odorless, Scratch-Resistant Crystal Primer  Low-carbon, odorless, scratch-resistantSemi-matte paint

Low-carbon, odorless, scratch-resistantGlossy topcoat  Diamond Gold · Anti-yellowing primer

Low-carbon, odorless, scratch-resistantMatte topcoat Diamond Gold · Anti-Aging Semi-Matte White Topcoat

Product Features|PRODUCT FEATURES

●Fresh scent●Delicate and smooth to the touch●Good heat resistance, high transparency

●The paint film is tough and full●Color retention performance●Good leveling property

●Removing benzene is healthier●Low odor, impact resistant●High hardness, scratch-resistant

Scene Display|Scene Display

Product Description|PRODUCT DESCRIPTION

A087·The low-carbon, odorless, scratch-resistant series of wood coatings is crafted using low-carbon odorless technology and advanced international paint-making processes, and canThree Hundred Sixty°Degrades harmful substances throughout the entire area, making the air fresh and clean.

Construction Guide|CONSTRUCTION GUIDE

Substrate treatment: 320#Sanding with sandpaper (removing stains, wood fuzz, and burrs from the surface of the board).

Board sealing: Primer (seal the board) to isolate water and oil.brush coating

Hole filling treatment: Scrape and apply putty (fill wood holes to improve the smoothness of the paint film).

Primer application: Apply primer (to fill wood pores and increase the thickness of the paint film).

Sand milling process:320#Sanding with sandpaper (to increase adhesion, remove remaining putty on the wood surface, and enhance interlayer adhesion).

Primer Application: Apply primer (further smooth the wood grain and increase the coating thickness).

Sand milling process:600#Sanding with sandpaper (increases adhesion, smooths the paint film, and enhances interlayer adhesion).

Topcoat application: Apply the topcoat (to reduce surface particles on the paint film and provide a better finish on the paint film surface).

Sand milling process:600#Sandpaper polishing (makes the entire paint film surface smooth and even, increasing the adhesion of the paint film).

Topcoat Application: Apply the topcoat (to give the paint film a uniform gloss, color, and other decorative and protective functions, making the surface of the paint film have a better coating effect).

Note:

A. When applying by brushing or spraying, it should be even without sagging.

B. Grind evenly when sanding, avoid grinding through, and remove surface dust after sanding.

C. Due to differences in construction methods, the number of coats of primer and topcoat can be adjusted according to actual needs.

Drying time:

(with dry filmThirtyμm, temperatureTwenty Five℃ meter) dry table:ThirtyWithin minutes; practical work: ≤Twenty Fourhour;SevenSky/25°C, if the temperature is belowTwenty Five℃, the paint film is relatively thick(Greater thanThirtyμm)The maintenance time should be correspondingly extended to achieve the desired coating effect.

Recoat Time:

Recoat: The previous coat of paint should be dry for at leastFourFor more than a few hours, it must be thoroughly sanded and dried before recoating. If the temperature is belowTwenty Five℃, the paint film is relatively thick (greater thanThirtyμm) The recoating time should be correspondingly extended.