Franchise hotline:400-830-9488
Wall finishing and leak repair Dealers wanted nationwide
Wall finishing and leak repair Dealers wanted nationwide
Franchise hotline:400-830-9488
You are here: Home » Wall paint » Lotus Leaf Anti-Stain Wall Paint 5L
The microscopic structure of lotus leaves is replicated using artificial technology, giving the paint film the lotus leaf's unique high hydrophobicity and self-cleaning ability. At the same time, the company's brand-new 'low VOC' technology is used to greatly reduce the residual odor in the product, allowing it to meet the national low VOC standards. While solving home wall problems, it also creates a fresh and healthy living space for you.
Product Introduction|PRODUCT PRESENTATION
| Product Model | Organic Seaweed Mud · Anti-Formaldehyde Wall Paint |
| Specification | 18L/20KG |
| Scope of Application | Interior wall |
| Gloss | Matte |
| Coating area | 14-16 square meters per liter per coat |
| Scope of application | Used for interior wall decoration and protection |
Product Features|PRODUCT FEATURES
●1. Odorless technology, excellent stain resistance
●2. Strong antibacterial and alkali resistance, good coverage
●3. Lotus leaves are water-repellent, with stronger breathability and waterproof functions
●4. Strong adhesion, long-lasting brilliance
●5. Level 5 scrub resistance, easy to clean, non-staining
Scene Display|Scene Display
Product Description|PRODUCT DESCRIPTION
The microscopic structure of lotus leaves is replicated using artificial technology, giving the paint film the lotus leaf's unique high hydrophobicity and self-cleaning ability. At the same time, the company's brand-new 'low VOC' technology is used to greatly reduce the residual odor in the product, allowing it to meet the national low VOC standards. While solving home wall problems, it also creates a fresh and healthy living space for you.
Construction Guide|CONSTRUCTION GUIDE
| Construction method | Roll coating, brush coating, or airless spraying |
| Substrate treatment | Wall Surface Treatment — New Walls - Remove surface dust, grease, and loose plaster. If there are any holes, repair them promptly to ensure the wall surface is clean, dry, and smooth. — Repainting Walls - Scrape off unstable old paint from the wall surface, remove surface dust, debris, and impurities, level and sand, then clean thoroughly and dry. Surface Dryness — Ensure that the moisture content of the pre-coated substrate is less than 10% and the pH value is less than 10 — The pre-coated substrate surface should be firm, dry, clean, smooth, and free of loose materials. |
| Repaint time | Surface dry: 30 minutes Hard dry: 120 minutes Recoat: at least 2 hours apart. In humid weather or when the temperature is too low, the time should be appropriately extended. |
| Coating system | 1-2 coats of primer, 2 coats of topcoat (recommended number of coats) |
| Paint consumption | 14-16 square meters per kilogram per coat. The paint consumption may vary depending on the roughness of the actual construction surface and the dilution ratio. |
| Construction Humidity | Please do not carry out construction in humid or cold weather (temperature below 5°C, relative humidity above 85%), otherwise the desired coating effect cannot be achieved. |
| Maintenance time | 7 days/25°C; at low temperatures (not below 5°C), extend appropriately to achieve the ideal paint film effect. |
| Tool Cleaning | During pauses in painting and after painting is completed, please promptly wash all tools with clean water. |
LinksAuto Spray EquipmentSpray GunPaint FranchiseWood Paint MakerChina Coatings NetGarment TagsArt Paint FranchiseArt PaintCustom office furnitureOffice furniture manufacturerImported Decorative PaintOffice furnitureImported Decorative PaintOffice furniture brandOffice furniture designSearch External Links
© 2017 Master Ali All rights reserved. ICP: Yue ICP Bei No. 11031542
