The A087 Odorless All-Purpose Anti-Scratch Wood Coating is carefully made using low-carbon odorless technology and internationally advanced paint-making processes, capable of degrading harmful substances in all directions 360°, keeping the air fresh and clean.

Product Model|PRODUCT MODEL

BSF-100DOdorless All-Purpose Crystal Primer

BSF-100Odorless All-Purpose Gloss Paint

BSF-100AOdorless All-Purpose Matte Finish Paint

BSF-100BOdorless All-Purpose Semi-Matte Paint

BSF-77Impact-resistant glossy floor paint

BSF-77AImpact-resistant matte floor paint

Product Features|PRODUCT FEATURES

●All-in-one natural plant formula

●Less harmful gas emissions, healthier

●The paint film is full and the texture is delicate

●Good heat resistance, high transparency

●High hardness, scratch-resistant

Scene Display|Scene Display

Product Description|PRODUCT DESCRIPTION

A087The odorless all-purpose scratch-resistant wood paint series is meticulously crafted using low-carbon odorless technology and internationally advanced paint manufacturing processes, and canThree Hundred Sixty°Degrades harmful substances throughout the entire area, making the air fresh and clean.

Construction Guide|CONSTRUCTION GUIDE

Construction methods: brushing, airless spraying

Coating system and number of coating layers:

Raw piece (cleaning, organizing, 240-grit sanding) → 1 coat of primer (360-grit sanding) → 2 coats of crystal clear primer (600-grit sanding) → 2 coats of topcoat → surface finishing

Substrate Treatment:

1. Ensure that the substrate surface is clean, dry, free of oil, dust, and impurities. Substrates with heavy grease are prone to shrinkage when applying primer. It is recommended to carefully sand and clean the substrate, and wash it with a thinner before painting.

2. For substrates bleached with hydrogen peroxide or bleach, wait at least 48 hours for them to dry completely. Then, use sandpaper to sand the surface residue clean before applying a sealing primer. It is recommended to first conduct a small-area test to ensure there is no abnormal discoloration, blotching, reddening, or yellowing before full application.

Construction Method:

1. Before construction, mix evenly. The theoretical ratio: main paint: special hardener: thinner = 2:1:2 (the amount of thinner can be adjusted according to climate, environment, brushing, spraying, and other viscosity requirements; the remaining part can be used for tool cleaning). After mixing the paint, stir evenly, let it stand for about 15 minutes for the bubbles to disappear, and then proceed with the application. Mix only as needed.

2. It is advisable to apply in thin layers with multiple coats, rather than thick layers. Each coated surface must be allowed to dry thoroughly (determined by not sticking to sandpaper) before carefully sanding and removing dust before applying the next coat. The interval for recoating should be more than 12 hours. Do not proceed if the air is too humid.

Paint mixing:

1. Before opening the can, invert the paint can (especially matte, semi-matte, colored paints, and clear primers) for 2 minutes and then shake well. After that, mix the paint according to the specified ratio, shake well, and filter it (it is recommended to use a 200-300 mesh filter for topcoat and floor paint, and an 80-200 mesh filter for primer). Let it sit for 15 minutes to remove bubbles before use. For better results, if the paint is not mixed well, uneven gloss may occur.

2. Before large-scale use, the pot life of the paint at the current temperature after mixing should be determined. Please use up the paint within its pot life after mixing.

3. The ratio of paint to curing agent should strictly follow the specified proportion, and the amount of thinner can be reasonably adjusted according to the specific situation.