Product Description|PRODUCT DESCRIPTION

This product is a single-component waterproof coating made by polymerizing advanced technology and raw materials. When using, pour into this productAdd an appropriate amount of cement. After stirring evenly, it is equivalent to a cement-based polymer(K11)Use. Quality effect and waterJust like clay-based polymer waterproof coatings,The coating film has high strength,High elongationTiles can be directly applied on top of the coating orCarry out latex paint construction.Since this product is a concentrated type of product,Saved a large amount of packaging for a wide range of usersAnd transportation costs.

Product Features|PRODUCT FEATURES

◆Has good adhesion to the concrete substrate, Can effectively prevent tiles from falling off;

◆Water-based and environmentally friendly,Toluene-free,Harmful substances such as formaldehyde,Can be used for waterproofing drinking water pools;

◆Bright in color,Can effectively prevent missed brushing,And has a certain decorative effect;

◆Aging-resistant,Resistant to high and low temperature changes,Long service life.

Construction Guide|CONSTRUCTION GUIDE

Construction method

OneThe base surface must be flat, solid, clean, and free of visible water.;

TwoSlowly add the powder to the corresponding liquid, stir thoroughly until uniform and free of particles, and let it sit.FiveCan be applied in minutes (before applyingThe base surface should be fully moistened);

ThreeCoating Key Points:

①Apply with a roller or brush, completing layer by layer according to the specified process sequence;

②If the paint has sediment, it should be stirred evenly immediately;

③Apply the coating as evenly as possible, without piling it up in certain areas, preferably in thin layers applied multiple times;

④The interval time between coatings should be based on when the previous layer is surface-dry and not sticky to the touch.

⑤Recommended dosage:1.5kg/m²-2.0kg/m².

Storage, Transportation, and Packaging

①Saved in5℃The above-mentioned shaded areas and powder materials should be stored in a dry place, with attention to moisture and sun protection, and shelf life.Twelvemonths (stored at room temperature);

②Packaging specifications:20L/Bucket.

Precautions

①Please do not enter5℃Construction in the rain or high humidity is not recommended;

②Not suitable for areas with significant deformation.