Product Description|PRODUCT DESCRIPTION

This product is made from organic liquid materials and inorganic powder materials using introduced advanced technology and raw materials. ,According to national or industry standardsRequires a two-component waterproof material made with a composite.Has excellent adhesive properties,Extremely high impermeability and strength under pressure,Quick Dryfast,Tiles can be directly laid on the surface of the waterproof layer.

Product Features|PRODUCT FEATURES

◆Has good bonding performance with the concrete substrate, effectively preventing tiles from falling off;

◆Water-based and environmentally friendly, free of harmful substances such as toluene and formaldehyde, can be used for waterproofing drinking water pools;

◆The colors are bright, which can effectively prevent missed spots and also have a certain decorative effect;

◆Aging-resistant, resistant to high and low temperature changes, and has a long service life.

Scope of Application|SCOPE OF APPLICATION

Suitable for the roofs of various buildings,kitchen and bathroomInterior and exterior walls,basement,Swimming pool,Protection of drinking water pools and the likeWaterproof and moisture-proof.

Construction Guide|CONSTRUCTION GUIDE

Construction method

OneThe base surface must be flat, solid, clean, and free of visible water.;

TwoSlowly add the powder to the corresponding liquid, stir thoroughly until uniform and free of particles, and let it sit.FiveCan be applied in minutes (before applyingThe base surface should be fully moistened);

ThreeCoating Key Points:

①Apply with a roller or brush, completing layer by layer according to the specified process sequence;

②If the paint has sediment, it should be stirred evenly immediately;

③Apply the coating as evenly as possible, without piling it up in certain areas, preferably in thin layers applied multiple times;

④The interval time between coatings should be based on when the previous layer is surface-dry and not sticky to the touch.

⑤Recommended dosage:1.5kg/m²-2.0kg/m².

Storage, Transportation, and Packaging

①Saved in5℃The above-mentioned shaded areas and powder materials should be stored in a dry place, with attention to moisture and sun protection, and shelf life.Twelvemonths (stored at room temperature);

②Packaging specifications:10L,20L/Bucket.

Precautions

①Please do not enter5℃Construction in the rain or high humidity is not recommended;

②Not suitable for areas with significant deformation.