All-Purpose Alkali-Resistant Sealing Primer 18L

You are here: Home » Wall paint » All-Purpose Alkali-Resistant Sealing Primer 18L

All-Purpose Alkali-Resistant Sealing Primer 18L

Ali Master All-Purpose Alkali-Resistant Interior and Exterior Wall Sealing Primer adopts new-generation synthetic technology and is specially designed as an intermediate latex paint applied between the substrate base and the topcoat.

Franchise hotline 400-830-9488

Inquire Now

Product Introduction | PRODUCT PRESENTATION

of application< td style="">

12-15 square meters/liter/single coat

product model	all-in-one alkali-resistant sealing primer
specification	18L/20KG
Scope	interior wall
gloss	matte
Coating area
Application Scope	used for interior wall decoration and protection

Product Features | PRODUCT FEATURES

● 1. Strong alkali resistance

● 2. Resistance to pan-salting

● 3. Good sealing properties and fast drying

● 4. Enhances wall system durability

● 5. Resists whitening and bleaching

scene display | SCENE DISPLAY

product description | PRODUCT DESCRIPTION

Construction Guide | CONSTRUCTION GUIDE

coats) < td style=""> 14-16 square meters/kg/coat. Due to differences in the actual roughness of the surface and the dilution ratio, paint consumption also varies.

Construction Method	roller coating, brushing, or airless spraying
Substrate treatment	Wall treatment — new wall construction - surface dust removal - greasy and loose mud plaster. If there are any pores, repair them promptly to ensure the wall surface is clean, dry, and smooth. — Recoating the wall surface – remove unstable paint films from old walls, clear out surface dust and debris, level and sand, and clean thoroughly to dry. Surface dry condition — ensure the surface moisture of the precoat substrate is less than 10%, pH below 10% — the surface of the precoat substrate is firm, dry, clean, flat, and free of loose or detached material.
recoat time	Coating System	Primer 1-2 coats, Topcoat 2 coats (recommended number of coat
Paint Consumption
Construction Humidity	Please avoid construction in humid or cold weather (temperature below 5°C, relative humidity above 85%), otherwise the desired coating effect will not be achieved.
Maintenance Time	7 days/25°C; Low temperature (not below 5°C) should be appropriately extended to achieve the desired paint film effect.
Tool Cleaning	After pausing during painting and finishing the painting, promptly rinse all instruments with clean water