Product Description|PRODUCT DESCRIPTION

This product is a mixture prepared using cement as the base material, combined with inorganic aggregates and special additives.A light gray inorganic powder waterproofing agent, belonging to the type of permeable crystalline waterproofing material.

Product Features|PRODUCT FEATURES

◆It has the characteristics of quick setting and early strength, and after the waterproof construction is completed, the next step can be carried out immediatelyConstruction of the process;

◆Has multiple uses; besides waterproofing and leak plugging, it can also handle things like rough surfaces and defects.Repair of other concrete structural defects, with low requirements for the base surface .

Scope of Application|SCOPE OF APPLICATION

①Suitable for walls, roofs, kitchens, and bathrooms of all new and old concrete and brick structures,Ground, tunnels, civil defense projects, subways, swimming pools, sewage tanks, large reservoirs, etc.Cheng's waterproofing and leak plugging;

②Used for waterproofing projects on water-facing or back-to-water surfaces.

Construction Guide|CONSTRUCTION GUIDE

Construction process

①Substrate treatment: Dry substrates should be sprayed with water to moisten them first. Any points or cracks with water seepage should be sealed first, and new structures should be cured.Waterproofing construction can be carried out after the period ends, and the old structure must have the original waterproof layer removed before waterproofing construction can be carried out. The base surface cannotItems with double-sided reflection, oil stains, uneven surfaces, or severe damage should be leveled and repaired.

②Strict ingredient measurement: according to the ingredients:Water=4:1Mix the ingredients in the specified proportions evenly, making sure there are no dry lumps or clumps, and stir until it reaches a viscous consistency before application.;

③Construction method: Use the iron plate plastering method or the trowel scraping method for construction, with a general construction thickness1.0-2.0mm,1.5mmThe above coating is appliedConstructed using the plastering method,1.0~1.5mmThe coating is applied using the scraping method.

④Curing: Curing should be carried out before initial setting, performing curing while constructing. Curing is done by using a paintbrush dipped in water to brush or spray on the surface of the applied waterproof layer.Method of applying fine mist to the surface of the waterproof layer .

Storage, Transportation, and Packaging

The product should be stored in a sealed container5℃Store in a cool, ventilated, and dry place. Shelf lifeTwelvemonth.

Precautions

①This product is a non-hazardous product, non-toxic, odorless, environmentally friendly, safe to transport, and should be protected from rain and damage from dropping to avoid packaging damage.

②It should be stored in a cool, dry warehouse, avoided from long-term exposure outdoors, and strictly prohibited from contact with water.