Product Description|PRODUCT DESCRIPTION

Ali Master Inorganic Paint is a water-based paint modified using natural inorganic minerals as raw materials. Its main components are inorganic materials such as alkali, metal silicates, aqueous solutions, and silicon dioxide, supplemented with various modified additives and pigments. Inorganic paint is alkaline, making it more suitable for application on similarly alkaline bases like cement and lime-sand substrates. It undergoes a chemical reaction with the lime in these substrates to form calcium silicate crystals, allowing it to integrate with the base and resulting in especially strong adhesion. It features natural environmental friendliness, fire resistance, acid and alkali resistance, aging resistance, and a long service life.

Product Features|PRODUCT FEATURES

◆Unique surface curing technology, with excellent washability and stain resistance;

◆Good coverage, more painting area;

◆The paint film has excellent breathability, good waterproofing, and mildew resistance;

◆Good weather resistance and excellent adhesion to solid substrates;

◆Low odor, good fresh technology.

Scene Display|Scene Display

Construction Guide|CONSTRUCTION GUIDE

Scope of application:

Suitable for decorative wall projects in residential buildings, hotels, schools, hospitals, shopping malls, basements, sports venues, airports, subways, tunnels, and other large buildings. Applicable to mineral-based surfaces, such as various concrete, cement, lime, gypsum, brick walls, putty, and other mineral-based surfaces.

Construction Method:

Brush, roll, or airless spray.

Coating system and number of coating layers:

Theoretical paint consumption (calculated for a 30μm dry film): 12-14 square meters per liter per coat. The actual coating area may vary depending on the roughness and dryness of the substrate surface, application method, and dilution ratio, which will also affect the spreading rate.

Drying time (at 25°C):

Surface dry: 30 minutes Hard dry: 120 minutes Recoat: at least 2 hours apart. In humid weather or when the temperature is too low, the time should be appropriately extended.

Construction Conditions:

1. Please do not carry out construction in humid or cold weather (temperature below 5°C, relative humidity above 85%), otherwise the desired coating effect cannot be achieved.

2. Store in a cool, dry, and ventilated place, strictly preventing freezing (not below 0°C). Any leftover paint should be stored in a sealed container.

Safety Matters:

1. Be sure to carefully read the construction instructions on the packaging text before use to achieve a reliable and satisfactory coating effect;

2. Before starting operation and use, try to open all doors and windows to ensure adequate ventilation in the construction area;

3. For allergic skin, always wear protective equipment during use; if it accidentally gets in the eyes, immediately rinse with plenty of water and seek medical assistance;

4. Do not allow children or pets to enter the construction area, and keep the product out of reach; if accidental contact occurs, rinse immediately with plenty of water and seek medical assistance.

5. When paint is spilled and leaks, cover it with sand or soil, then collect and dispose of it properly. Do not pour paint into the sewer or drainage pipes.